Download  Print this page

Honeywell ADEMCO 6162 User Manual

Custom alpha keypad.
Hide thumbs
   

Advertisement

ADEMCO 6162 / 6162V Custom Alpha Keypad –
User Guide
Addressable Custom Alpha Keypads for use with
Honeywell Control Panels
Sounder
Programmable
6162V Microphone
Function Keys*
*
The Function Keys can be be programmed
for special functions or panic alarm activations.
See the Function Keys section and check with
the system installer for more information.
UL NOTE: The User Code, Quick Programming and Fire-related
features were not evaluated by UL.
The Panic feature is not for use for UL 609 and ULC S303 applications.
6162V VOICE CONTROL KEYS
VOLUME ADJUST
PLAY/STOP RECORD
VOICE KEY
FUNCTION/RECORD
4-Line Alpha Display
Custom Zone Designators
= System ARMED
= System NOT ARMED
= READY to Arm
= NOT READY to Arm
6162V: Message Indicators
= Recording Message
= Message Recorded
= No message
See the keypad's User Guide for details.
6162V Keys
Arming Keys
Refer to the 6162V Keypad Voice
Features section for details using these
keys.

Advertisement

Table of Contents

   Also See for Honeywell ADEMCO 6162

   Summary of Contents for Honeywell ADEMCO 6162

  • Page 1 ADEMCO 6162 / 6162V Custom Alpha Keypad – User Guide Addressable Custom Alpha Keypads for use with Honeywell Control Panels 4-Line Alpha Display Custom Zone Designators = System ARMED = System NOT ARMED = READY to Arm = NOT READY to Arm...
  • Page 2 SETTINGS KEY Displays Settings Menu: 1 Set Time/Date 2 View Event Log 3 Reboot Keypad 4 Set User Code** Press The menu-based user code 1. Add a User programming feature is only 2. Delete a User available with certain systems. 3.
  • Page 3 Add a User: Press to select ‘Add a User’ option. • At ‘Enter User No.’ screen, enter a unique two-digit number and press • At the ‘New User Code’ prompt, enter a new four-digit user code and press Note: Four digit user codes options: 0000 – 9999. The keypad will confirm the User setting and exit the Settings mode: Confirmation Meaning...
  • Page 4 Disabling Single Button Arming 1. Press and hold down the keys at the same time for 3 seconds. The screen displays the keypad’s address. 2. Press to move to the USER CODE entry screen 3. Enter and then press to exit. COMMERCIAL STAY MODES For commercial controls, if Stay Mode 2 is programmed, refer to the control’s manuals and the table below for Stay mode arming.
  • Page 5 Voice Mode When Voice mode is enabled, the keypad announces basic system arming status upon arming or disarming (e.g., “Disarmed, Ready to Arm,” “Armed Away”). To enable the Voice mode: Adjust the keypad volume to “On” or “Check” (at the desired volume).
  • Page 6 PANEL WITH WHICH THIS DEVICE IS USED FOR WARRANTY INFORMATION AND LIMITATIONS OF THE ENTIRE ALARM SYSTEM. 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2013 Honeywell International Inc. www.honeywell.com/security Ê800-11507V1(Š 800-11507V1 7/13 Rev A...

This manual is also suitable for:

Ademco 6162v

Comments to this Manuals

Symbols: 0
Latest comments: