Honeywell 6820EVS Installation And Optimization Manual page 165

LS10144-001SK-E
# for Contact ID format; "FT" + Zone # in SIA format).
To check sensitivity for an individual detector, follow the steps below.
1. From the Main Menu, press 2 for Point Functions.
2. Press 2 for Point Status.
3. Select the module where the point you want to check is located.
4. Enter the number of the point you want to check and press ENTER.
A screen similar to those shown in Figure 10-5 will display for 6820 and Figure 10-6 for 6820EVS.
Figure 10-5 Checking Detector Sensitivity Compliance 6820 4x20 display
10-8
System Operation