Mapping Led Points; Programming Using The Hfss Software Suite; Programming Using An Annunciator - Honeywell 6820EVS Installation And Optimization Manual

Model 6820 / 6820-EVS Installation Manual
8.2.4

Mapping LED Points

Figure 8-6 is a simple example showing how LED points are mapped to zones and output groups. Typically you
would create two output groups for each zone, one for alarms and one for troubles. (LED points are available
when Models 5865-3/4 and/or 5880 are used with the system.)
Figure 8-6 Example of LED Points Mapped to Output Groups
8.3

Programming Using the HFSS Software Suite

You can use the HFSS Honeywell Fire Software Suite to program the control panel onsite (personnel will need to
be onsite during the upload or download process). HFSS is a software package that lets you easily program the
control panel using a Windows-based computer. HFSS is needed for Mapping. When using HFSS, you can set up
the programming options for the panel, save the options in a file, then download the file to the panel. You can
connect to the control panel directly using the onboard USB or Ethernet. Updates are available at
www.silentknight.com
.
8.4

Programming Using an Annunciator

You can program the control panel from a system annunciator, using either the control panel's on-board
(Applies to Models 5865-3/4 and 5880)
8-9
LS10144-001SK-E