Using The Menus; Basic Operation; Setting Time And Date; Disable / Enable A Point - Honeywell 6820EVS Installation And Optimization Manual

LS10144-001SK-E
10.3.2

Using the Menus

To move through the menus:
To select an option:
Exit Menu

10.4 Basic Operation

10.4.1

Setting Time and Date

1. Select 4 for Set Date & Time.
2. Make changes in the fields on the screen. Use right arrow to move through the fields. Use the up or down
arrow key to select options in the fields.
3. When the date and time are correct, press ENTER.
10.4.2

Disable / Enable a Point

1. Select 2 for Point Functions.
2. Select 1 for Disable/Enable Point.

10.4.2.1 Disable / Enable NACs by Template

1. Press 1 for Disable NACs by Template, press 2 to Enable NACs by Template.
2. Use the up or down arrow key to move through the list of templates. Press ENTER to select the current tem-
plate.

10.4.2.2 Disable / Enable NACs by Group

1. Press 3 to Disable NACs by Group, or press 4 to Enable NACs by Group.
2. Use the up or down arrow key to move through the list of groups. Press ENTER to select the group high-
lighted.

10.4.2.3 Disable / Enable Zone Points

1. Press 5 to Disable Zone Points, or press 6 to Enable Zone Points.
2. Use the up or down arrow key to move through the list of zones. Press ENTER to select the zone high-
lighted.

10.4.2.4 Disable / Enable Point

1. Press 7 to Disable /Enable Point.
2. Choose Module.
3. Use the up or down arrow key to choose point and press ENTER.
4. Press right arrow to disable or enable point.
the up or down arrows
Use
arrow
to move to a previous menu.
Enter the number of the option, OR press ENTER if the option has the = symbol next
to it.
Left arrow
10-4
to move through the options in a menu. Use
System Operation
the left