Configuring The Column Id Module - Agilent Technologies G1323B User Manual

Configuring the Column ID Module

1 Select the Configure button [F2] in the System screen.
2 Select Column Comp from the list.
3 Press Enter to enter the Column Compartment Configuration screen.
4 Press the Column ID button [F4] to enter Column ID screen.
5 To toggle between left and right column press the Left/Right button [F8].
If no column tag is sensed, the record fields are not active and the left/right tag sign in the
N O T E
upper right corner or the window is crossed out.
6 Enter your column data into the fields as required. Additional fields are
7 Pressing the Write button [F7] will transfer the information into the column
8 Pressing the Right button [F8] will show the information fields of the right
The column ID information is updated as soon as a column with ID tag is installed correctly.
N O T E
So you can check the number of injections that have been made on the column in this
screen.
1200 Series Handheld Control Module Users's Guide
available by pressing the More ... button [F1].
tag.
column tag (if column is installed).
Using the Column Compartment

Configuring the Column ID Module

8
105