Working With Methods; Loading A Method - Agilent Technologies G1323B User Manual

1200 series handheld control module

Table of Contents

Working with Methods

A method contains a complete set of injection, separation and detection

parameters, including the timetable and injector program. Vial range

information is not part of the method.

There are two types of methods:

• The module method. The method parameters are stored in the individual

• The PC card method. The method parameters are stored on a PC card. A

Unless stated otherwise, the following sections refer to module methods.

Loading a Method

A method can be loaded using the Method button [F3] in the Analysis or

Samples screen:

1 Enter the Analysis or Samples screen.

2 Select Method; the current parameters are displayed.

3 Press the Module button [F1].

4 Select a method from the list.

5 Press Enter.

You can also load a method directly from the Analysis screen by using the

selection keys and changing the method in the method list.

The Method/Module screen lists all methods that are stored in the modules. For

each method there is a date when the method was last changed and a short

user description. When a method is loaded it becomes the current method.

1200 Series Handheld Control Module Users's Guide

LC modules and not in the control module. A method that is stored in the

individual LC modules can be loaded, modified, saved and run from the

control module.

method that is stored on the PC card can be loaded to the LC modules or

transferred to another LC system. Methods cannot be run directly from the

PC card. The method must first be loaded from the PC card before it can be

run. When the PC card method is loaded it becomes a module method.

Working with the Control Module