7
Using the Detectors
Entering Settings
Multiple Wavelength Detector
The wavelength for signal A can be entered in the Analysis screen. The
wavelength for signal B, slit width and peak width can be entered in the MW
Detector Settings screen. This screen is accessed by selecting the Settings
button [F1] in the Analysis screen. Additional signals and functions are
accessed by selecting the More... button [F1] under MW Settings.
Only the G1323B version of the control module allows control of the Multiple Wavelength
N O T E
Detector. The G1323A will display "resident or unsupported module" if a RI detector is
configured in the Agilent 1200 system.
Refractive Index Detector
The control module allows to set the RID cell temperature in the Analysis
screen.
Temperature, Peakwidth, polarity and automatic recycling can be set in the RI
detector settings screen. This screen is accessed by selecting the Settings
button [F1] in the Analysis screen.
Automatic zero and automatic purge can be set by selecting the More... button
[F1] under RI Settings.
Only the G1323B version of the control module allows control of the Refractive Index
N O T E
Detector. The G1323A will display "resident or unsupported module" if a RI detector is
configured in the Agilent 1200 system.
92
1200 Series Handheld Control Module Users's Guide