7
Using the Detectors
Turning the Lamp On and Off
Turning the Lamp On and Off
To turn the lamp on and off use the On/Off button [F7] in the Analysis screen:
1 Enter the Analysis screen.
2 Select the On/Off button [F7].
3 Select the
The same can be achieved by using the On/Off button [F8] in the Detector
Settings or Control screen available through the Analysis or System screens.
When the lamp is turned on, a lamp ignition routine is started. For more information
N O T E
Ignition Routine (VWD only)"
90
Lamp
button [F6].
on page 98.
1200 Series Handheld Control Module Users's Guide
"Lamp