5
Using the Autosampler
Troubleshooting the Autosampler
Troubleshooting the Autosampler
1 Select the Tests button [F3] in the System screen.
2 Select Autosampler from the menu.
3 Press Enter.
You can select a variety of injector steps to move individual parts of the
autosampler.
The injector step functions can be used in troubleshooting to check the single
steps of the injection cycle. For a complete description of each step, see the
Reference Manual for the Agilent 1200 Series autosampler.
If you have a thermostatted autosampler, you can also test the auxiliary
signals by pressing the Signal button in the Test screen. The auxiliary signals
will be displayed graphically now (see
Autosampler"
82
on page 79).
1200 Series Handheld Control Module Users's Guide
"Setting up the Thermostatted