2
Working with the Control Module
Installing the Control Module
Installing the Control Module
The CAN connectors are similar to LAN adapter connectors. Do not insert LAN
WA R N I N G
connectors into the CAN or vice versa, since the CAN uses 24 V and might blow up
the LAN card.
Connect the CAN (controller area network) connector of the control module
cable to one of the two CAN connectors on one of the Agilent 1200 Series
modules.
CAN connector
Figure 13
36
Connecting the CAN Connector to Rear Panel
1200 Series Handheld Control Module Users's Guide