Displaying Data Graphically; Selecting Signals - Agilent Technologies G1323B User Manual

2 Working with the Control Module

Displaying Data Graphically

Displaying Data Graphically

Using the Plot screen you have many opportunities to display a wide variety of
signals on a graphic display while the analysis is performed.

Selecting Signals

Among all the signals available up to 3 can be chosen for graphical display.
1 From the Plot screen press the Select button [F6] to show the Plot selection
2 Use the Direction and Selection keys to navigate within and between the
3 Exchange signals between the list boxes by pressing the Move button [F8] or
4 When the signals and their X (time) and Y (signal unit) ranges have been
50
menu.
Available Signals and Selected Signals list boxes.
the Enter key.
On the right hand side from the Selected Signals list box you can see the
legend to the signals.
You can also enter a time range (X axis) for the plot in this screen.
The different signals can be set up by pressing the Setup button [F7].
Depending on which signal is highlighted you can enter an individual
Y-Range setting here.
specified press the Done button [F6] to switch to the graphic view.
1200 Series Handheld Control Module Users's Guide