Protecting A Method - Agilent Technologies G1323B User Manual

Alphanumeric characters can be entered also by pressing the keys 1 to 9 several times (e.g.
N O T E
1 A B C, 2 D E F, 3 G H I, ....). See also
5 Move the cursor to the next entry position using the right direction key and
6 Repeat
7 Select the Done button [F6] to accept the method name.
The left arrow key can be used as backspace, the right arrow key is used to move to the
N O T E
next character position.

Protecting a Method

To protect the current method.
1 Select the Method button [F3] in the Analysis screen.
2 Select Module from the menu.
3 Select the Save As button [F8].
4 Select the Protected check box.
5 Select the Done button [F6].
The method is now protected against inadvertent changes. Any changes to the
method will not be accepted until the method is unprotected, by saving it
again without protection. For further protection remove the Control Module
from the Instrument and store it in a secure place.
Any unauthorized method or instrument changes can be traced by the system
logbook.
1200 Series Handheld Control Module Users's Guide
repeat step 4.
step 4 and step 5
Working with the Control Module
Figure 4 on page 22.
until you have specified your method name.
Working with Methods
2
43