Initial Safety Information For The Dfb Laser Source Module; Laser Safety Labels - Agilent Technologies Agilent 81663A User Manual

1

Initial Safety Information for the DFB Laser Source Module

Table 1 DFB Laser Source Module Safety Information

Laser Safety Labels

10
The laser sources specified by this user guide are classified
according to IEC 60825-1 (2001)
The laser sources comply with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated 2001-July-26.
Laser type
Wavelength range
Max. CW output power*
Beam waist diameter
Numerical aperture
Laser Class according to IEC 60825-1 (2001)- International
Max. permissible CW output power
* Max. CW output power is defined as the highest possible optical power that the laser
source can produce at its output connector
Laser class 1M label
Figure 1 Class 1M Safety Label - Agilent 81663A
A sheet of laser safety labels is included with the laser module
as required. In order to meet the requirements of IEC 60825-1
we recommend that you stick the laser safety labels, in your
language, onto a suitable location on the outside of the
instrument where they are clearly visible to anyone using the
instrument.
Agilent DFB Laser Source Module User's Guide
Agilent 81663A
CW DFB Laser
with built-in isolator
1300 to 1650 nm
see display
<28 mW
9 µm
0.1
1M
163 mW