Installing A Transmitted Light Source - GE ImageQuant LAS 4000 Original Instructions Manual

6 Turn the filter changer, put a filter in the desired position and secure it in place.
7 Select the appropriate filter from the drop-down list and click the OK button.
Note:

3.5.5 Installing a transmitted light source

This section describes how to insert the UV transilluminator or the white light table into the IDX.
1 Push the transmitted light source along the guide at the bottom of the IDX.
Getting Started with ImageQuant LAS 4000 28-9607-59 AB
The filter changer returns to the original position when you click the Start, Focusing or
Method/Tray position buttons.
3 Installation
3.5 Installation of hardware
3.5.4 Attaching a filter to the filter changer
39