Lan Interface Status Bits; Figure 8: Eis001 Lan Status Bits (Bits 11 & 13) - GE PACSystems RX3i User Manual

Chapter 3. Configuration

3.4 LAN Interface Status Bits

There are 80 LAN Status bits; the EIS001 module will typically use two of the LSI bits to control
parameterization, as follows:
i. The EIS001 will signal that it is ready to accept parameterization by asserting Bit 11. and
ii. The CPU should typically not communicate with the EIS001 until such time as Bit 13 has been
asserted.
Note: Should there be a failure of the EIS001 during parameterization, these bits may remain in a 1
or 0 state.
22
Figure 8: EIS001 LAN Status Bits (Bits 11 & 13)
PACSystems RX3i Ethernet 104 Server Module User Manual GFK-2949C