Chapter 6. Configuration of IEC 104 Server Parameters Using COMMREQ
The IEC 104 Firmware version can be checked in the word as defined in the COMMREQ configuration
for Server status space described in section 6.3.3, Parameters for Server Status Space.
The details of the Status areas space is defined in Definition of the Status Area, in Appendix A. The
Major and Minor version for IEC 104 Firmware are available in the offset 1 (Ver_1word) and
2 (Ver_2word) respectively.
The following is a capture of IEC 104 Firmware version as per the sample IEC 104 server requirement.
Alternatively, the IEC 104 firmware version can also be checked using Station Manager Command –
stat a as shown in Appendix B.
The ETM001 firmware version can be found using online command as:
Target---> Online Commands --->Show Status...----->Details
36
PACSystems RX3i Ethernet 104 Server Module User Manual
GFK-2949C