July - GE PACSystems RX3i User Manual

Station interrogation
(station-specific parameter, mark 'X' if function is only used in the standard direction, 'R' if only used in the
reverse direction, and 'B' if used in both directions)
X
global
group 1
group 2
group 3
group 4
group 5
group 6
Clock synchronization
(station-specific parameter, mark 'X' if function is only used in the standard direction, 'R' if only used in the
reverse direction, and 'B' if used in both directions)
X
Clock synchronization
X Day of week used
X RES1, GEN (time tag substituted/ not substituted) used
SU-bit (summertime) used
optional, see 7.6
Command transmission
(station-specific parameter, mark 'X' if function is only used in the standard direction, 'R' if only used in the
reverse direction, and 'B' if used in both directions)
Direct command transmission
Direct set point command transmission
X
Select and execute command
X
Select and execute set point command
X
C_SE ACTTERM used
X
No additional definition
X Short pulse duration (duration determined by a system parameter in the outstation)
X
Long pulse duration (duration determined by a system parameter in the outstation)
Persistent output
X Supervision of maximum delay in command direction of commands and set point commands
Fixed 5sec
GFK-2949C
group 7
group 8
group 9
group 10
group 11
group 12
Maximum allowable delay of commands and set point commands
group 13
group 14
group 15
group 16
Information Object Addresses assigned to each group
must be shown in a separate table

July 2017

Appendix D. Device Profile
81