D.20 RIO Distributed I/O Controller
Chapter 6: Using the D.20 RIO
Front and top panel LEDs
Status LEDs
LAN port status LEDs
D.20 RIO - HARDWARE USER'S MANUAL
Using the D.20 RIO
This chapter describes the user interfaces available with the D.20 RIO:
•
Front panel LEDs allow you to view the operational status of the D.20 RIO.
•
D.20 RIO HMI allows you to view and configure the operational status of the D.20 RIO.
•
System Utilities allow you to manage the D.20 RIO system setup.
Once the D.20 RIO is powered up, the LED indicators on the front and top panels of the D.20
RIO become active. The indicators provide status information on the operation of the D.20
RIO.
The status LEDs indicate the unit's operational status:
LED Display
D.20 2
D.20 1
LAN B
LAN A
RX
RX
LNK
LNK
TX
TX
SPD
SPD
D.20 2
D.20 1
LAN B
LAN A
RX
RX
LNK
LNK
TX
TX
SPD
SPD
The LAN Port Status LEDs provide a visual indication of the status for the LAN A and LAN B
Ethernet communication ports.
Label
Color
PWR
Green
RDY
PWR
RDY
Green
RDY
PWR
GE Information
Status Description
Power
Solid light when power is present
(during boot-up, normal
operation, and self-diagnostics).
Ready
Light is off during Initialization
(boot-up and self-diagnostics).
Slow blinking light when the D.20
RIO is ready to process data.
51