Bushnell 119599C2 Instruction Manual page 56

TROUBLESHOOTING
Field Scan (Time Lapse) not working properly
1. Make sure that the stop and start times of Field Scan "A" and "B" do
not overlap (for example, do not set the start time of "B" to 8AM if
the stop time of "A" is 10AM).
Camera responds slowly, does not always capture image when
triggered
Avoid setting the "Image Recycle" parameter to ON when an SD
card with capacity of 16 GB or higher is inserted. The Image Recycle
feature requires some time to scan the card and determine the
oldest file(s) to delete and replace with the newest files (images).
The larger the card, the more time this will take, and the camera
may perform significantly slower with high capacity cards if the
overwrite feature is activated. There should be no issue using Image
Recycle with smaller capacity cards (<16 GB), and the feature is
provided to offer a useful option when limited capacity cards are
used, or when it it not practical to check the camera and replace (or
download and format) the card on a frequent basis.
Do not mix battery types-use ALL lithium or ALL alkaline.
56
Do not mix old and new batteries.
Rechargeable batteries are not recommended.