Bushnell 119599C2 Instruction Manual page 25

When you are finished changing the settings of one or more parameters,
press MENU again to exit the SETUP menu. MENU can also be pressed
anytime you want to cancel changing a parameter's setting after a new
setting has been selected (but OK has not been pressed yet). After setting
the parameters to your preferences, be sure to move the switch to ON
to begin actually taking photos or videos. No images will be captured if
the switch is left in the SETUP position (unless you press the RIGHT/Shot
key after exiting the menu)-in fact, the camera will power off automatically
after five minutes with no key pressed.
Parameter Displays
All the available settings for the currently displayed parameter are
shown on one screen, with a checkmark next to the current setting
(Fig. 4a, pg. 26). To change the setting, first use the UP/DOWN
keys to highlight (select) the new setting you want (Fig. 4b), then
press OK to "Execute" the actual change to the selected setting.
The checkmark will appear next to your new setting to confirm this
(Fig. 4c).
EXAMPLES-Changing the Settings of Some Common Parameters
Following this page, you will find tables listing all of the parameters
found in the SETUP Menu, along with their possible settings (or range
of settings), and a detailed description of what the parameter controls
and what the settings do. If you read the previous section detailing how
to select parameters and change their settings, you should be able to
dive right in, find the parameter(s) you want, and setup the camera to
suit your preferences. But maybe you'd rather walk through an example
or two first:
To change any parameter's setting, always start with the power switch in
the SETUP position. After the LCD comes on, press the MENU key.
The first parameter you will see when you first enter the SETUP Menu
is "Mode". To change it from its default setting of "Camera" (still photos)
to "Video" (shoot video clips), press the DOWN key to highlight "Video".
Press the OK key to "Execute" (Set) the new setting you've selected for
this parameter.
25