Bushnell 119599C2 Instruction Manual page 35

Parameter
Format
Time Stamp
Set Clock
Settings
(Bold=default)
Execute (followed
by an additional
No/Yes step)
ON, OFF
(Set)
Description
Deletes (erases) all files stored on a
card to prepare it for reuse. Always
format a card that has been previously
used in other devices. Caution! Make
sure you have downloaded and
backed up any files you want to
preserve first! Press OK to execute,
then select Yes and press OK again.
Press MENU (or select NO then press
OK) to exit without formatting.
Select "On" if you want the date &
time (that the image was captured)
imprinted on every photo/video,
select "Off" for no imprint. Note: the
current temperature, barometric
pressure, moon phase, and (user set)
camera name will also be imprinted
on your still photos.
Press OK and use the UP/DOWN keys
(to change the setting) and LEFT/
RIGHT keys ( to move to the next
field) to set the hour (24-hr format
only, "00"=midnight, "12"=noon) and
minute, and then (on the lower row),
the year, month and date. Note: after
the first wireless data transmission,
the current time is automatically reset
by the network. The time may not be
correct on your 1st test image if you
didn't use "Set Clock" as described
above to set it manually first.
35