Mounting And Positioning The Camera - Bushnell 119599C2 Instruction Manual

MOUNTING AND POSITIONING THE AGGRESSOR
WIRELESS CAM
Mounting
After you've set up the camera's parameters to your personal preferences
at home or in your truck, you're ready to take it outside and slide the
power switch to "ON". When setting up the Aggressor Wireless Cam
for scouting game or other outdoor applications, you must be sure to
mount it in place correctly and securely. We recommend mounting the
Aggressor Wireless Cam on a sturdy tree with a diameter of about 6 in.
(15cm). To get the optimal picture quality, the tree should be about 16-
17 ft. (5 meters) away from the place to be monitored, with the camera
placed at a height of 3.5-5 ft. (1~1.5 m). Also, keep in mind that you will
get the best results at night when the subject is within the ideal flash
range, no farther than 80' (24m) and no closer than 10' (3m) from the
camera.
There are two ways to mount the Aggressor Wireless Cam: using the
provided adjustable web belt, or the tripod socket.
Using the adjustable web belt: Fig. 5 illustrates using the web belt on
the Aggressor Wireless Cam. Push one end of the belt through the
two brackets on the back of the Aggressor Wireless Cam. Thread the
end of the strap through the buckle. Fasten the belt securely around
the tree trunk by pulling the end of the strap firmly so there is no slack
left.
Fig. 5: Attaching the Belt
40
Belt Channel
Strap Buckle