Bushnell 119599C2 Instruction Manual page 36

Parameter
Set Field Scan
Note: images
captured in field
scan mode will be
saved to the SD
card, but will not
be transmitted
wirelessly.
Coordinate
Input
36
Settings
(Bold=default)
ON, OFF
(After On is
selected): "A" Start/
Stop, "B" Start/
Stop, Interval
ON, OFF
See "Using the
Setup Menu Input
Screens"
Description
Turns Field Scan (Time Lapse) recording
mode on/off. When activated, Field Scan
forces the camera to take photos or
videos even when it is not triggered by
a nearby live animal, useful for constant
monitoring of an area that might be
far away from the camera. The user
can set the start and stop times for up
to two independent "blocks" of Field
Scan recording, as well as the interval
time between each photo/video. To
ensure correct operation, avoid setting
overlapping start/stop times for Field
Scan A and B. Please read the "Field
Scan 2x..." section of this manual (pgs
27-30) for details on using this feature.
NOTE: If the "Camera Mode" parameter
is set to "Day" or "Night" operation only,
that will take priority over your Field
Scan settings. Set Camera Mode to
"24HR" if you are setting day and night
Field Scan start and/or stop times.
Allows the user to input latitude
and longitude coordinates for the
camera's location. This data will be
embedded in the files saved on the
camera's SD card (if "On" is selected).
This makes it possible to see each
camera's location as a "pushpin" on
Google Earth™ maps when reviewing
a folder full of photos from multiple
cameras, or use other "geotag"
capable software (Picassa®, etc). The
camera's current coordinates are
also displayed during daily check-in
messages.