Bushnell 119599C2 Instruction Manual page 30

(Step 1)-set Field
Scan Mode to "On"
Steps 4 & 5 are
optional (only
required if you want to
set up a second block
of Field Scan recording
with different stop and
start times)
Note: the Interval
Setting sets the timing
between each image for
both Field Scan "A" and
"B" recording blocks.
Field Scan photos are saved
to the SD card, but will not be
transmitted wirelessly. images
captured in field scan mode are
stamped with a "T" icon ("Time
Lapse").
photos are stamped with an "M"
icon ("Motion Trigger")
"T" Icon indicates Field Scan
30
(Step 2)
Scan "A" (press OK)
(Step 4) (opt)-select Field
Scan "B" (press OK)
(Step 6)-select Field
Normally captured
mode photos
select Field
-
Scan "Interval"
set Field
(Step 3)
-
Scan "A" Stop & Start
(Step 5) -set Field
(opt)
Scan "B" Stop & Start
(Step 7) set Field
-
Scan Interval