Using The Setup Menu - Bushnell 119599C2 Instruction Manual

• Press the DOWN key to quickly set the camera to take still photos.
• Press the RIGHT key to manually trigger the shutter. This is useful
for testing the camera-make sure you are in SETUP mode, press the
RIGHT key, and a few seconds later a photo or video (depending on
how the camera was set) will be saved to the SD card (or internal
memory if no card is inserted). The "number of images taken"
counter on the bottom left of the LCD will increase by one. If the
display indicates "SD PROTECTED" when you press the SHOT key,
switch the camera OFF, remove the SD card and slide its protect
switch off.
• Press the OK key to replay (review or playback) photos/videos
on the LCD, or a connected TV monitor (std. display models). See
"Playing Back/Deleting the Photos/Videos" (pg. 42) for more details.

USING THE SETUP MENU

The main purpose of the SETUP mode is to allow you to change the
settings of the camera's parameters (17 different ones are available) so
your Aggressor Wireless Cam operates exactly the way you want it to.
You will do this by entering the SETUP Menu and pressing the keys below
the LCD display, which will show you each parameter and its setting.
Changing Parameter Settings in SETUP Mode
A wide range of options or "parameters" are provided to allow you to set
the Aggressor Wireless Cam to your operational preferences. To change
the setting of any parameter you must first switch to the SETUP mode.
Once in SETUP mode, pressing the MENU button will allow you to select
any parameter and change its setting. The name of the parameter and its
current setting will be shown on the LCD. Pressing the RIGHT or LEFT key
scrolls to the next or previous parameter (RIGHT key to move on to the
next parameter and LEFT key to go back to the previous parameter), and
pressing the UP or DOWN key lets you select a different setting for the
currently displayed parameter. Once you have selected your preferred
new setting for a parameter, press the OK button to save the new setting
(actually change it).
23