Bushnell 119599C2 Instruction Manual page 41

Using the tripod socket: The camera is equipped with a socket at
the bottom end to enable mounting on a tripod or other mounting
accessories with a standard1/4-20 thread.
Three optional accessories, a Bear Safe" protective box (119855C),
Deluxe Tree Bracket (119652C) and Solar Power panel (119756C) are also
available.
Sensing Angle and Distance Test
To test whether the Aggressor Wireless Cam can effectively monitor the
area you choose, this test is recommended to check the sensing angle
and monitoring distance of the Aggressor Wireless Cam. To perform the
test:
• Switch the Aggressor Wireless Cam to the SETUP mode.
• Push the MENU button twice to enter the "Live View" mode.
• The display will now let you preview the area covered by the camera
in its current position.
• Make movements in front of the camera at several positions within
the area where you expect the game or subjects to be. Try different
distances and angles from the camera.
• If the motion indicator LED light blinks, it indicates that position can
be sensed. If it does not blink, that position is outside of the sensing
area.
The results of your testing will help you find the best placement when
mounting and aiming the Aggressor Wireless Cam. The height away
from the ground for placing the device should vary with the animal size
appropriately. In general, 3 to 6 feet is preferred.
You can avoid potential false triggers due to temperature and motion
disturbances in front of the camera by not aiming it at a heat source or
nearby tree branches or brush (especially on windy days).
Switching ON the Camera
Once you switch to the ON mode, the motion indicator LED (red) will
blink for about 10 seconds. This gives you time to close and lock the front
cover of the Aggressor Wireless Cam and then walk away. During this
41