Camera Name And Coordinate Input - Bushnell 119599C2 Instruction Manual

CAMERA NAME AND COORDINATE INPUT SCREENS
Camera Name Input
After selecting the Camera Name parameter (the only setting is "Input"),
press OK. If necessary, delete the previous or default name by pressing
the RIGHT key until the backspace symbol (
"A" & "B", also between "j" & "k") is highlighted, then keep pressing OK.
Select (highlight) each alphanumeric character you want, using the
LEFT/RIGHT keys, and pressing OK after each one to set it. When finished
naming the camera, press MENU to save the name to memory.
Coordinate Input
When selecting the Coordinate Input parameter for the first time, the
default location (Bushnell offices in KS) is shown. When you send your
first test image, the camera will update the coordinates in the camera and
on the website to its current location. While the camera remains powered
on, its current GPS coordinates will be updated automatically during each
daily check in.
Latitude
Longitude
Note: You may see "negative" latitude or longitude coordinates online. These
designate South latitudes and West longitudes. US/Canada locations will have
North (+) latitude coordinates and West (-) longitude coordinates.
Degrees
Latitude
N=North,
S=South (3 digits)
(La) N000,00'00"
(Lo) W000,00'00"
Degrees
W=West,
Longitude
E=East
(3 digits)
) (located between letters
Minutes Seconds
Minutes Seconds
39