Table of Contents
Advertisement
WARNING:
Be sure the camera's power is switched OFF
before inserting or removing SD cards or batteries.
USING THE AGGRESSOR WIRELESS CAM
Once you've prepared your Aggressor Wireless Cam by properly
installing batteries and an SD card, you could simply take it outside, strap
it to a tree, switch it on and leave-and you might get some great photos
that are exactly what you wanted. However, we highly recommend that
you first spend some additional time indoors with this manual and your
camera until you know a bit more about what the 3-way switch and those
control keys do. If nothing else, you'll probably want to at least set the
date and time so the camera will imprint them (or not-it's your option)
on your photos as they are taken, learn how to set the camera to shoot
video clips instead of still photos if you like, and read some tips about
mounting it on a tree.
OPERATING MODES
The Aggressor Wireless Cam has three basic operational modes:
• OFF mode: Power switch in the OFF position.
• ON mode: Power switch in the ON position (LCD screen is off.)
• SETUP mode: Power switch at SETUP position (LCD screen is on).
OFF MODE
The OFF mode is the "safe" mode when any actions must be taken, e.g.,
replacing the SD card or batteries, or transporting the device. You will also
use OFF mode if you connect the camera to a computer's USB port later
to download your photos/videos. And of course, when you are storing or
not using the camera, you will switch it to OFF. Please note that even in
the OFF mode the Aggressor Wireless Cam still consumes power at a
very low level. Therefore, it's a good idea to take the batteries out of the
battery compartment if the camera will not be used for a long time.
21
Hide quick links:
Advertisement
Table of Contents
