Table of Contents
Advertisement
Parameter
Set Video
Sound
(only affects video
clips)
Image Recycle
Wireless Mode
Transmit
Frequency
Settings
(Bold=default)
ON, OFF
ON, OFF
(NOTE: setting
Image Recycle
to "ON" is not
recommended
when using 16GB
or higher capacity
SD cards)
ON, OFF
Quick, Never
Description
Select "ON" to record audio along
with the video when the camera is
set to video mode (saved file sizes
will be slightly larger).
Select "ON" (default) if you want
the oldest photos/videos to be
replaced by new images once the
SD card is full. Select "OFF" if you
want operation to stop when the
card is full. Press OK.
Select "OFF" to operate the unit as
a standard trail camera, with no
wireless transmission of images
(captures photos & videos will be
stored on the SD card). NOTE: once
OFF is selected, it is not possible
to re-activate Wireless operation
remotely via internet or phone app,
only by selecting ON on the camera
itself.
Selects how often captured photos
are sent to your cell phone or email.
The default "Quick" setting will
transmit each image transmitted
soon after it is captured (battery life
will be reduced). "Never" is similar
to turning Wireless Mode off (no
images will be transmitted)-but
this can be changed once per day
via remote communication back to
"Quick" , enabling transmission to
resume.
37
Hide quick links:
Advertisement
Table of Contents
