Coordinate Input - Bushnell Core Instruction Manual

Camera Mode 24 Hrs, Day, Night
Default Set Cancel, Execute
Version None
USING THE SETUP MENU INPUT SCREENS
Camera Name Input
After selecting the Camera Name parameter (the only setting is "Input"), press OK.
If necessary, delete the previous or default name by pressing the RIGHT key until the backspace symbol (
) (located between letters "A" & "B", also between "j" & "k") is highlighted, then keep pressing OK.
Select (highlight) each alphanumeric character you want, using the LEFT/RIGHT keys, and pressing OK
after each one to set it. When finished naming the camera, press MENU to save the name to memory.

Coordinate Input

After selecting the Coordinate Input parameter, press UP or DOWN to select the On setting and press
OK. The latitude and longitude for any location where you plan to place the camera can be obtained at
many websites, for example:
address, just zip code, or use the various types of maps to locate the approximate position. The format
you will need to use to enter the coordinates in the Core Trail Camera menu screen is shown below:
Note: You may see "negative" latitude or longitude coordinates online. These designate South latitudes
and West longitudes. US/Canada locations will have North (+) latitude coordinates and West (-)
longitude coordinates.
MOUNTING and POSITIONING the Core Trail Camera Mounting
After you've set up the camera's parameters to your personal preferences at home or in your truck,
you're ready to take it outside and slide the power switch to "ON". When setting up the Core Trail
Camera for scouting game or other outdoor applications, you must be sure to mount it in place correctly
and securely.
We recommend mounting the Core Trail Camera on a sturdy tree with a diameter of about 6 in. (15cm).
To get the optimal picture quality, the tree should be about 16-17 ft. (5 meters) away from the place to
be monitored, with the camera placed at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that you will
get the best results at night when the subject is within the ideal flash range, no farther than 100ft/30m
(119936C/1198838C) and no closer than 10ft (3m) from the camera.
There are two ways to mount the Core Trail Camera: using the provided adjustable web belt, or the
tripod socket.
http://itouchmap.com/latlong.html
17
Low Sensor will adjust the cameras sensitivity to
reach out 40'
Allows user to limit operation to only day or night
period if desired. An ambient light level sensor
determines "Day" vs "Night" automatically.
Select "Execute" and press OK to restore all
parameters to the original factory default
settings. If the camera is behaving oddly and you
think you may have changed the setting for
something accidently (but aren't sure which one),
this will reset all parameters to their most
commonly used or "generic" settings.
Displays current firmware version for reference.
. You can enter a nearby street