F5 Corpus
8.2.3
Example of a screen showing a system
fault
8.2.3.1
Identified module
The system fault indicator is displayed on the screen when the
control system module has detected a problem. The codes below
indicate where the problem is located.
PM = Power module
JSM = Joystick module
8.2.3.2
Error message
The error message displayed in the bottom left corner of the screen
provides a brief description of the error type.
8.2.3.3
Error code
The four-digit code displayed in the bottom right corner of the
screen indicates which protection circuit has tripped.
282
Troubleshooting
Figure 226. Screen showing system fault indication.