F5 Corpus
4.1.3
Backrest
4.1.3.1
Removing backrest
To make transportation of the wheelchair easier, the backrest can be
removed in a few simple moves.
1. Remove the backrest cushion. It is fixed in place by means of
Velcro on the rear of the cushion.
2. Remove the upper section of the backrest by carefully undoing
the clip on the rear of the backrest and pulling the upper section
straight up at the same time.
If necessary, the headrest can also be removed; see
4.1.1 Headrest , Page 153.
Preparing for use
Figure 128. Clip holding the backrest.
159