Example Of A Screen Showing A System Fault - Permobil C400 Service Manual

Troubleshooting R-net

Example of a screen showing a system fault

Identified module
Error message
Identified module
This indicates the control system module that detected the problem.
PM= Power module
JSM= Joystick module
Error message
The error message provides a brief description of the error type.
Error code
The four-digit code indicates which protection circuit has been triggered.
2.1.4 Example
The screen example shown below displays the following information:
Identified module: Power module error
Error message:
Low Battery
Error code:
2C00
This means that the battery needs charging or that the battery has not been connected properly.
• Check the battery connections. Attempt to charge the battery if it is properly connected.
Identified module
Error message
PM
PM
Controller Fault
Low Battery
PM
Low Battery
Error code
0506
2C00
Error code
2C00
49
Trouble Shooting guide