Permobil F5 Corpus User Manual page 244

F5 Corpus
4. Remove the hub cap (the design may vary depending on
markets and market regulations) by carefully levering it out using
fingers on two edges of the hub cap.
5. Remove the three screws that hold the wheel in place. The
central screw must not be removed.
6. Remove the wheel by pulling it straight out.
7. Remove the spacer (only on some models).
244
Maintenance and repairs
Figure 203. Use your fingers as follows on two edges
of the hub cap.
Figure 204. Pull the wheel straight out after you have
removed the three screws.