Permobil F5 Corpus User Manual page 99

F5 Corpus
Create a sequence
• Select the command to use as the sequence initiator. In this
example, TV – ON.
• Select Learn Code, by deflecting the joystick to the right while
the command is highlighted.
• Point the TV remote control at the control panel's IR receiver
and press the On/Off button twice.
• After each successful learn operation a check momentarily appears
on the screen, select Learn Code again.
• Point the DVD remote control at the control panel's IR receiver
and press the On/Off button twice.
• After each successfully learned operation, a check momentarily
appears on the screen, selectLearn Code again.
• Complete the sequence by highlighting Exit and deflecting the
joystick to the left.
• Now the TV – ON command will have a check mark and three
dots beside it, showing a learned sequence.
Getting to know your wheelchair
Figure 65. A check mark followed by three dots
showing a learned sequence.
99