F5 Corpus
8.2.2
Diagnostic screens
8.2.2.1
Current diagnostic screen
When the control system's integrated protection circuits have
tripped so that the control system can no longer operate the
wheelchair, a diagnostic screen is displayed in the control panel
display.
This indicates a system fault, i.e. R-net has detected a problem
somewhere in the wheelchair's power system.
NOTICE
The diagnostic screen displays error
occasionally
If the fault is in a module not currently in use, it may still be possible to drive
the wheelchair, but the diagnostic screen will display occasionally.
Switch off the wheelchair and leave it switched off for a few
minutes. Restart the wheelchair. If the fault persists, you must switch
off the wheelchair and contact your service provider. Write down
the information displayed in plain text in the control panel display
and pass it on to your service provider.
280
Troubleshooting