F5 Corpus
Control system temperature
This symbol is displayed when the control system has intentionally
reduced its own power to protect itself against heat damage.
Motor temperature
This symbol is displayed when the control system has intentionally
reduced the power to the motors to protect them against
overheating.
Hourglass
This symbol is displayed when the control system is changing states.
An example would be entering into programming mode. The
symbol is animated to show sand falling.
Emergency stop
If the control system is programmed for latched drive or actuator
operation, then an emergency stop switch is usually connected to the
external profile switch jack. If the emergency stop switch is operated
or disconnected, this symbol will flash.
Getting to know your wheelchair
Figure 35. Temperature control of system.
Figure 36. Motor temperature.
Figure 37. Hourglass.
Figure 38. Emergency Stop.
73