F5 Corpus
4.1.2.3
Headrest height
1. Undo the handle (B) at the back of the backrest.
2. Remove the headrest by lifting it straight up (A).
3. Adjust the height by changing the placement of the screw on the
inside of the bracket. Place the screw in one of the four positions
depending on the preferred height. Position 1 provides the
lowest setting and position 4 provides the highest setting.
If position 1 is to be used, all the functions of the chair must be
tested using that position to check for interference.
4. Install in the reverse order.
156
Preparing for use
Figure 125. Height adjustment screw.