F5 Corpus
5.6.1.2
Installing drive wheels
1. Fit the spacer (only on some models).
2. Fit the wheel onto the wheel hub.
3. Insert the three screws and the three washers. Tighten the screws
no more than 11 lb.ft.
4. When all screws and washers are in place, tighten the screws.
Tightening torque 17.7 lb.ft.
Maintenance and repairs
Figure 205. Fit the wheel onto the wheel hub.
Figure 206. Use a torque wrench to tighten the screws.
245