Permobil C500 Owner´s Manual
Example of a screen showing a system fault
Identified module
Error message
Identified module
This indicates the control system module that detected the problem.
PM=
Power module
JSM= Joystick module
Error message
The error message provides a brief description of the error type.
Error code
The four-digit code indicates which protection circuit has been triggered.
Repair of defective units
Apart from specific OEM-approved spare parts (contact Permobil for further
information on these), there are no replaceable parts in the R-net control sys-
tem. Consequently, defective units must be sent to Permobil or a Permobil-
approved repairer for repair.
PM
PM
Controller Fault
Low Battery
93
R-net diagnostics
Error code
0506
2C00