Example Of A Screen Showing A System Fault; Repair Of Defective Units - Permobil C350 Service Manual

Troubleshooting
Troubleshooting R-net

Example of a screen showing a system fault

Identified module
Error message
Identified module
This indicates the control system module that detected the problem.
PM= Power module
JSM= Joystick module
Error message
The error message provides a brief description of the error type.
Error code
The four-digit code indicates which protection circuit has been triggered.

Repair of defective units

Apart from specific OEM-approved spare parts (contact Permobil for further information on these), there
are no replaceable parts in the Rnet control system. Consequently, defective units must be sent to Per-
mobil or a Permobil-approved repairer for repair.
NB
If any part is replaced without Permobil's approval, the wheelchair's warranty lapses. Permobil cannot be held responsible for
losses of any kind arising as a result of a component of the Rnet control system being opened, adjusted or modified without per-
mission.
PM
PM
Low Battery
Controller Fault
Error code
0506
2C00
58