Permobil F5 Corpus User Manual page 94

F5 Corpus
Learning an IR code
The IR receiver is located above the screen on the control panel,
marked with an A in the figure.
When learning a code, the remote control device must be held so
that its IR transmitter points towards the IR receiver on the control
panel, i.e. the little window marked A in the figure.
Learning an IR code procedure
Enter the IR Setup menu.
Select an appliance, e.g. TV – (Device 1) as illustrated. "(Device 1)"
shows where the equipment's unique name may appear on the
screen.
94
Getting to know your wheelchair
Figure 57. The IR receiver location.
Figure 58. Sample of IR Setup.