Table of Contents
Advertisement
RECEPTION
2. Press the Yes key then press the
until Switch 05 is displayed.
3. If you wish to change the setting, press
1 using the ten keypad.
4. Finish: Press the Yes key, then press
the Function key.
Cross-references
Substitute Reception: see page 53.
Authorized Reception
Overview
This feature helps you to reject junk fax mail.
To authorize reception from a particular sender:
Specify the senders whose messages you want to receive. Do this by
programming the RTI or CSI of each sender (ask the sending party what their
RTI/CSI is Or make a communication with that terminal, print a TCR and read
off the RTI/CSI). If the other party is using a machine made by another maker,
they may not be familiar with the terms RTI or CSI. Explain that you are
interested in the telephone number that they stored in the machine for
identification purposes. (Function 71)
Switch Authorized Reception on. (Function 62)
Select whether to accept (Function 63)
- Only messages from Authorized Senders.
- All messages except those from Authorized Senders.
If the RTI/CSI is not the same as any of those that you have programmed into this
feature, the message will not be accepted.
66
key
k
Forwarding: see page 70.
j k
j k
Digit 1
0: Messages are not rejected.
1: Messages are rejected
Advertisement
Table of Contents
