Editing Group Dial - Ricoh 170 / 180 Operator's Manual

STORING OFTEN USED NUMBERS
3. Press the Yes key.
4. Press the Quick Dial key you wish to
program the Group Dial in, then press
the Yes key.
5. Either:
If you wish program a label: Press
the Yes key.
If you do not wish to program a la-
bel: Press the No Key, then go to
step 8.
6. Enter a label for this Group using the
Quick Dial keys. Example: EUROPE
BRANCH
Inputting and editing : see page 100
7. Press the Yes key. If the display is not
as opposite, press the Yes key again.
8. Enter a number that you wish to store in
this group. For example:
Quick Dial 08 : Press the Quick
Dial 08 key.
Speed Dial 10: Press the Speed
Dial key and 1,0 using the ten key-
pad.
Full number: Input it using the key-
pad on the operation panel.
9 Press the Yes key.
10.Either:
Input another number: Go to step 8.
Print a list of Group Dial Numbers: Press the
Finish storing numbers in this group: Press the No key and the Function
key.

Editing Group Dial

1. Press the Function Key and 3,3 using
the ten keypad, then press the Yes key.
At this time, you can print a Group Dial list be
pressing the key then press the Start key.
j
32
n l
llllllllllllllllll
llllllllllllllllll
n
N
lllllllll
key.
j
l
j
j k
lllllll
j k
k