Table of Contents
Advertisement
Quick Reference Card
Basic Transmission Procedure [Type I Model]
Memory Transmission
1
Make sure that the machine is in standby mode.
Check that the Memory indicator is
lit.
2
If it is not lit, press the Line Select
key.
3
Carefully place the document in the feeder.
4
Select the resolution (and halftone if necessary)
You may select one or more of the
following options. To select an
option, press the right arrow on the
scroll key, then press one of the
5
following combinations of keys.
Send Later
Page Count
TTI On/ Off
Enter the telephone number in one of the following ways
Quick Dial
Speed Dial
6
Group Dial
Ten Key Pad
Handset
On Hook Dial
7
Press the YES key.
Either:Dial another number go to
step 6. then Press the Start key.
8
To dial another number, go to step
6. Otherwise, press the Start key.
The machine stores your message
9
in memory, then sends it to each
terminal in sequence.
Immediate Transmission
Check that the Memory indicator is
not Lit.
If it is lit, press the Line Select key.
Quick Dial
Speed Dial
Ten Key Pad
Handset
On Hook Dial
Press the START key.
The machine dials, then your
message is fed, scanned, and
sent to the other terminal.
Advertisement
Table of Contents
