Specifying A Destination; Entering A Fax Number - Ricoh 2015 General Settings Manual

Specifying a Destination

You can specify the destination using
one of three methods.
❖ ❖ ❖ ❖ Fax number
p.29 "Entering a Fax Number"
❖ ❖ ❖ ❖ E-mail address
p.31 "Entering an E-mail Address"
❖ ❖ ❖ ❖ Destination list
p.31 "Using the Destination List"
This section covers these functions
and others in more detail.
Note
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers and e-
mail addresses are programmed in
separate memory, dialing fax
numbers using the number keys
does not change the percentage on
the display.

Entering a Fax Number

Enter numbers directly using the key
pad on the right side of the control
panel.
Note
❒ Maximum length of a fax number:
128 digits.
❒ You can insert pauses and tones in
a fax number. See p.30 "Pause",
p.30 "Tone".
A A A A
Make sure that
the destination display column.
Note
❒ If it is not displayed, press
[ ].
B B B B
Enter the fax number using the
number keys.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
again.
Specifying a Destination
is displayed in
2
29