Editing Receiver's Fax Information Via Web Browser - Ricoh 2015 General Settings Manual

Using Fax with Computers
Editing Receiver's Fax Information Via
Web Browser
W h e n t h e r e c e i v e r b e i n g p r o -
grammed or added to the address
book is a T.37 full mode compatible
type with the Internet Fax function,
you can set the following receiver's
fax information using a Web browser.
• Compression type
• Paper size
• Resolution
Preparation
Before programming, check the re-
5
ceiver's fax information.
Note
❒ For details, see Help using the Web
browser.
❒ When the receiver's fax informa-
tion is sent back from a T.37 full
mode compatible receiver after
transmitting an Internet Fax docu-
ment, pre-existing fax information
is overwritten.
Reference
p.43 "T.37 Full Mode", Facsimile
Reference <Basic Features>
A A A A
Start up the Web browser on a
computer connected to the ma-
chine.
B B B B
In the [Address] box, enter the fol-
lowing characters, and then press
the { { { { Enter} } } } key of the keyboard:
h t t p : / / x x x . x x x . x x x . x x x
("xxx.xxx.xxx.xxx"= machine's IP
address)
Top Page appears.
C C C C
Click [Administrator Mode], and
then enter the user name and
password.
64
D D D D
Click [Address Book] on the left.
The [Address List] page appears.
E E E E
Set the Internet Fax data format.
When the programmed receiver's
fax information changes
A Click the radio button to select
the registration number you
want to change, and then click
[Change].
The [Change User] page appears.