Ricoh 2015 General Settings Manual page 456

Using Internet Fax Functions
❒ You can limit the size of transmit-
ted e-mail messages. See p.73 "E-
mail Settings", Facsimile Reference
<Advanced Features> .
❒ See p.54 "Received Images" for
how e-mail is actually received by
the computer when it is sent with
mail options selected.
❒ When you transmit an Internet Fax
specifying a user code, and the e-
mail address is set as the routing
3
destination of the specified user
code, a Communication Result Re-
port is sent after the transmission
is completed. This makes it possi-
ble to verify the result of a trans-
mission.
❒ You can specify fax destination
and Internet Fax destination si-
multaneously.
❒ You cannot send e-mails to a desti-
nation as cc.
A A A A
Press [
B B B B
When you set an e-mail option,
press [TX Mode].
If you are not setting e-mail op-
tions, proceed to step D.
46
] to display .
C C C C
Select [E-mail Options] using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } } key.
To enter the subject directly
A Select [Attach Subject] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
B Select [Manual Input] using { { { { U U U U } } } }
or { { { { T T T T } } } } , and then press the { { { { OK} } } }
key.
C Enter the subject.
Reference
"Entering Text", General Set-
tings Guide.
Note
❒ If you enter a wrong subject,
press the { { { { Cancel} } } } key, and
then enter the subject again.