Reading The Display And Using Keys; Initial Display - Ricoh 2015 General Settings Manual

Getting Started
{ { { { OK} } } } key
14.
Press to set a selected item or entered nu-
meric value.
15.
Number keys
1
Press to enter numeric values.

Reading the Display and Using Keys

This section explains how to read the display and using the selection key for the

initial display.

Note
❒ The copy display is set as the default screen when the machine is turned on.
You can change the settings in [System Settings]. See General Settings Guide.
1.
Selection keys
Correspond to the function items at the
bottom line on the display.
Example: Basic screen
When the instruction "press [JobReset]"
appears in this manual, press the center
selection key.
{ { { { Cancel} } } } key
2.
Press to cancel an operation or return to
the previous display.
4
1 2
{ { { { OK} } } } key
3.
Press to set a selected item or entered nu-
meric value.
4.
Scroll keys
Press to move the cursor in each direc-
tion, step by step.
When the { { { { U U U U } } } } , { { { { T T T T } } } } , { { { { V V V V } } } } , or { { { { W W W W } } } } key ap-
pears in this manual, press the scroll key
of the same direction.
4
OK
3
AAW024S1