The Display - Elcometer 224 Operating Instructions Manual

R

4 THE DISPLAY

The display shows measurement data, menus
and gauge settings. The display shown here is
a typical TOP reading screen.
The reading screen changes depending upon
units, [TOP] memory, softkeys locking and
whether extended menus are selected.
To maximise the size of the reading value on the
display, ensure that Softkeys Locked is
deactivated - see page 17.
• ZERO - Press to zero the gauge (using a
glass zero plate).
• [TOP] DATA - Press to access, configure
and review gauge memory (batching) - see
page 21.
• STATS - Press to view statistical analysis of readings - see page 17.
• MENU - Press to access the setup menus and configure your gauge - see page 9.
• [TOP] - If is displayed flashing next to the battery status symbol, it indicates that your gauge and
your PC have established a Bluetooth
8
Peak to
valley
height
Zero
gauge
[TOP] View
readings data
(memory)
®
connection - see page 29.
Battery
status
Units
Setup
menus
View readings
statistics